YOU WILL NEED per container
A4 fab foam
A4 sheet of corrugated card
Tin can* (as shape guide)
Trims (buttons, paper flowers, card, etc.)
With a craft knife cut your piece of A4 corrugated card to a 10.5cm width.
Using your tin can as a guide, wrap the card around it and with a pencil mark where the overlap is.
Remove the card and trim down the side so there is a 2cm overlap. Staple at the top, middle and bottom to secure a tube shape.
Trim your A4 sheet of foam to an 11.5cm width. Make into a tube shape and place inside the corrugated paper. As before mark the overlap and cut away any excess. Place snugly inside your corrugated paper.
Using the tin can drawa circle for a base onto the foam and cut out. With a glue gun stick this to the base of your container and allow to dry. Trim with different decorations for each.